Yadda ake kunshe mashinan FFP2|KENJOY

Yaya sukeFFP2 abin rufe fuskakunshin?A yau, masana'antun abin rufe fuska na likitanci za su yi bayanin hanyar tattara abin rufe fuska, ta yadda za mu kara fahimtar fakitin abin rufe fuska na FFP2.

FFP2 jakar marufi na maskurin za a iya raba kusan cikin buhunan marufi na filastik (jakunkunan PE, jakunkuna masu ɗaukar hoto na filastik) rashin haifuwa, jakunkuna marufi na likita & kayan (jakunkuna na marufi, na'urar marufi ta atomatik) masks na haifuwa, injin marufi ta atomatik (marufin filastik - rashin haifuwa, likita taushi blister marufi ta atomatik - haifuwa)

Filastik marufi na atomatik

Ya dace da abin rufe fuska na likitanci, abin rufe fuska na kariya da sauran fakitin filastik.Abubuwan da ake amfani da su gabaɗaya membrane OPP ne.Mai sarrafa motar servo mai hankali, mai sauƙin haɗi tare da layin samar da abin rufe fuska, farawa ba tare da tsayawar kayan ba

Jakunkuna marufi na haifuwa da kayan aikin rufewa

Jakar marufi na likita (jakar-roba)

Jaka-filastik na takarda yawanci ya ƙunshi gefe ɗaya na takarda (takardar dialysis na likitanci na gellatinized) da kuma gefe ɗaya na fim ɗin filastik (PET/PE likitan kumshin fim).Ana buƙatar fakitin don injin numfashi na FFP2.

Abubuwan da aka haɗa marufi na kasuwa na al'ada

Takardar dialysis na likita (60g, 70g, 80g) + 3g Henkel likitancin likitanci (wasu masana'antun suna amfani da manne na gida) wanda ya ƙunshi takarda m likitanci + PET/PE fim ɗin haɗin gwiwar likitanci.

FFP2 abin rufe fuska na takarda aikin takarda na dialysis da buƙatu: toshe ƙwayoyin cuta, ana iya magance su cikin sauri, daidai da ƙa'idodin likita.

Ayyukan manne: manne likita da takarda tare da fim ɗin haɗin gwiwar likita na iya haifar da wani tashin hankali don haka jakar filastik ba za ta fashe ba a cikin tsarin haifuwa, sufuri, ajiya da sauransu.A lokaci guda kuma, ba a samar da fiber na takarda bayan an tube tare da membrane mai hade don hana ma'aikatan kiwon lafiya fadowa daga zaren takarda da kuma fada cikin jikin majiyyaci don haifar da kamuwa da cuta.

Membran composite na likita: saduwa da ka'idodin likita, toshe ƙwayoyin cuta.

An rufe jakar takarda-roba ta al'ada tare da bangarori uku.Bayan FFP2abin rufe fuska factoryya saya, sanya shi a cikin abin rufe fuska kuma yi amfani da injin rufewa na likita don rufe gefen na hudu.Tare da jakar, sa'an nan kuma ya kafa quadrilateral sealing, ethylene oxide sterilization, haifuwa da gas ta cikin takarda a cikin jakar don kashe microorganisms, da dai sauransu, bayan da parsing tsari, epoxy ethane gas daga takarda surface, gaba daya parsing, m samfurin. jaka ba tare da ragowar ethylene oxide ba, kwayoyin microbial, da dai sauransu. A lokaci guda duk an kashe su.Takardar dialysis mai kyau na likita da kuma a baya na membrane composite na likita tare da toshe kwayoyin cuta, aljihun haifuwa ya zama cikakkiyar tsarin shinge na bakararre, jakar da aka kashe kwayoyin cuta, ba zai iya shiga sabon kwayoyin ba, kuma a cikin yanayin ajiya mai dacewa, zai iya kiyayewa. Shekaru 3 ko shekaru 5 bakararre lokacin riƙewa (lokacin riƙewa bakararre wato samfuran kiyaye ranar ƙarshe, yana da alaƙa da amfani da kayan tattarawa)

Likitan marufi na atomatik (na'ura mai laushi mai laushi) a halin yanzu, ƙattai na kayan taimako na cikin gida saboda babban fitarwa, tsadar aiki, don haka sun fahimci sarrafa marufi na likitanci, ta yaya suke aiki?

Abubuwan da ake buƙata don kayan aikin sun kasu kashi biyu:

Takardar dialysis na likita (takarda mai rufin likita)& fim ɗin haɗin gwiwar likita

Ta hanyar kayan aiki, fim ɗin haɗin gwiwa na likita yana da zafi ta hanyar ƙirar ƙirar aluminum, kuma an lalata matsa lamba mara kyau don samar da rami mai ɓoye.Sa'an nan kuma, an saka abin rufe fuska na likita a cikin kayan aiki kuma an buga kwanan wata samfurin ta kayan aiki.Sa'an nan kuma, takardar likita ta dialysis da fim suna mai zafi tare don samar da tsarin shinge mara kyau, kuma a ƙarshe, an yanke samfurin da aka gama ta atomatik.Daidai ne da jakar haifuwa da aka saka a cikin abin rufe fuska kuma an rufe shi, ƙarshen shine haifuwa kuma ba zai maimaita bayanin ba.

Me yasa buhunan filastik ba su dace da haifuwar ethylene oxide na na'urorin likita ba?

1. Yanayin samar da jakar filastik takarda na likitanci shine maki dubu ɗari ko ma ma'aunin tsarkakewa na daraja dubu goma, masu kera jaka na PE suna da wahalar cimmawa.Dole ne mai ba da tallafi na samfuran likitanci ya kasance daidai da yanayin masana'anta na masana'antar kayan aikin likita.

2.PE bags ba zai iya amfani da m matsa lamba haifuwa, EO a cikin korau matsa lamba haifuwa ne fiye da -40 sauki fashe bags.Masks sune samfurori masu ban sha'awa, gas na EO ba shi da sauƙin shiga kuma ba sauƙin fita ba, ɗan ƙaramin ethylene oxide maras kula ya wuce daidaitattun, kuma ethylene oxide shine carcinogen mai ƙarfi, amfani da masks ba cikakke ba, amma cutarwa.

Ɗayan gefen jakar filastik ɗin takarda ce ta likitanci, wacce za ta iya wucewa ta iskar gas ɗin ethylene don sauƙaƙe shigar da ƙudurin ethylene oxide.

Wannan shine yadda ake tattara abin rufe fuska na FFP2.Idan kuna son ƙarin sani game daFFP2 abin rufe fuska, don Allah a tuntube mu.